Home Tanker Trucks Tank trucks for naphtha gas

Tanker trucks for naphtha gas

RENAULT BASE CHASSIS

Brief description of the add-on

General characteristics	tank with a volume of 10 m3 (single-section), oval cross-sectional shape. The material of the tank is stainless steel with a bottom thickness of at least 5.0 mm and a wall thickness of at least 4.0 mm.
Equipment.	A neck in the central part of the tank with a filling hatch and a breathing valve; The indicator of tank filling is a meter rod adapted in the neck of the tank; A device for the use of a liquid measuring rod. It is made in the manhole cover in the center of the container, in the form of a guide of the appropriate diameter, 100 - 150 mm long, with the possibility of sealing after use; A hatch for a subway rod; The bottom valve is made of corrosion-resistant aluminum; The presence of a platform and an external ladder that provides proper access to the filler neck for personnel. The steps of the ladder and the platform cover are made of non-sparking material; Optional equipment with a universal ADR kit for the transportation of dangerous goods in a special box; Two sleeve pouches, a box for sand and equipment, and mounts for hazard class plates and danger signs; Drain pipe with a valve (tap) at the rear of the tank, a spigot (threaded fitting) of the drain pipe for attaching rubber hoses ø 100 and ø 75 mm; Drainage hoses DN75 (3") in the amount of 2 pcs., length not less than 4 m, with quick-release non-sparking couplings of Camlock type; Availability of antistatic grounding on the tank body and the vehicle chassis - a chain with a copper tip. Grounding with a wire on a coil of at least 5 m, a pin of at least 1 m, clamps and a clearly marked grounding point;

General characteristics

tank with a volume of 10 m3 (single-section), oval cross-sectional shape. The material of the tank is stainless steel with a bottom thickness of at least 5.0 mm and a wall thickness of at least 4.0 mm.

Equipment.

A neck in the central part of the tank with a filling hatch and a breathing valve;
The indicator of tank filling is a meter rod adapted in the neck of the tank;
A device for the use of a liquid measuring rod. It is made in the manhole cover in the center of the container, in the form of a guide of the appropriate diameter, 100 - 150 mm long, with the possibility of sealing after use;
A hatch for a subway rod;
The bottom valve is made of corrosion-resistant aluminum;
The presence of a platform and an external ladder that provides proper access to the filler neck for personnel. The steps of the ladder and the platform cover are made of non-sparking material;
Optional equipment with a universal ADR kit for the transportation of dangerous goods in a special box;
Two sleeve pouches, a box for sand and equipment, and mounts for hazard class plates and danger signs;
Drain pipe with a valve (tap) at the rear of the tank, a spigot (threaded fitting) of the drain pipe for attaching rubber hoses ø 100 and ø 75 mm;
Drainage hoses DN75 (3") in the amount of 2 pcs., length not less than 4 m, with quick-release non-sparking couplings of Camlock type;
Availability of antistatic grounding on the tank body and the vehicle chassis - a chain with a copper tip. Grounding with a wire on a coil of at least 5 m, a pin of at least 1 m, clamps and a clearly marked grounding point;